| Frequently
Asked AK-47 Questions
Read
past questions and the answers
Ask
our Experts Questions about your AK-47 or other
rifles, Click
Here
It's FREE
to ask our experts a question, you don't need
to fill out any personal information
But if you do want a reply,
include your contact information, it will not
be made public. We do not answer all questions
and do not contact or personally respond to
everyone who asks for information.
Got
issues with our Answers? Do you know more than
the experts?
Then speak up, let us know we want to get accurate
information out, we're not on an ego trip.
Use our Contact
Form to add or comment on an answer, or
just use the form
here.
We're happy to post accurate info or info on
the stuff we don't know about.
Past
AK47 Questions & Answers - Click Here
| russian ak47 parts kit that needs a milled reciever |
01/02/2010 |
|
| Question:
I have a russian ak47 parts kit that needs a milled reciever. I havent had any luck finding one that i can afford. Can you point me in the right direction? Will it accept a stamped reciever insted? |
Answer:
No a stamped will not work
There is only one Milled Receiver to get IMO that is the Firing Line version
They aren't cheap, but you get what you pay for
|
Submitted
by: Jim Parrott, 01/02/2010
|
Answered
by: AK47 Dood,
|
|
|
| IS A NORINCO AK47 TRIANGLE 66 A PREBAN |
12/15/2009 |
|
Question:
IS A NORINCO AK47 TRIANGLE 66 756S7 A PREBAN
NY IS TUFF WAS SUPPOSE TO BE WHEN I PURCHASED IT |
Answer:
I would not be certain of when anything in China was made. You can research when rifles were imported though, so I suggest you researh the US Importer marks, not the Chinese factory marks
Good luck
|
Submitted
by: Richard Kretzmer, 12/15/2009
|
Answered
by: AK47 Dood,
|
|
|
| Who is the smart #ss that calls himself ak47dood!! |
Sun. Dec 13, 2009 |
|
| Question:
Who is the smart #ss that calls himself ak47dood!!!Are you on here to help people or just be a d#ck? |
Answer:
I am
I am here to have fun since it is a free service you are free to use the websites and you are free to leave.
I am rude to idiots trying to illicit illegal activities
If you want instructions on how to illegally convert an AK47 to full auto you deserve a smart-A answer..
after answering hundreds of similar questions over the last 5 years I would challenge you to disagree
|
Submitted
by: Guest, Sun. Dec 13, 2009
|
Answered
by: AK47 Dood,
|
|
|
|
| Question:
is there a way where the trigger pull could be reduced it is a little stiff |
Answer:
You could install a US trigger, try the Tapco, most people like theirs a lot
|
Submitted
by: jim bascino, 12/03/2009
|
Answered
by: AK47 Dood,
|
|
|
| AK47 magazine catch/release spring back into the trigger guard |
11/29/2009 |
|
| Question:
i have a mak-90 type ak-47 (7.62x39) i would like to know how do you reassemble the magazine catch/release spring back into the trigger guard? i have tried every thing i know how to and still can not get it ! please help thank you |
Answer:
Have you tried You Tube? sounds like a DVD would be your best bet, but you tube might have a clip of that assembily
|
Submitted
by: rick mcwhirter, 11/29/2009
|
Answered
by: ,
|
|
|
| how much does a colt ak47 cost? |
Mon. Aug 10, 2009 |
|
| Question:
how much does a colt ak47 cost? |
Answer:
zero, there is no such firearm
AK47 is Russian
Colt makes the M-16 (US rifle)
|
Submitted
by: Guest, Mon. Aug 10, 2009
|
Answered
by: ,
|
|
|
|
Question:
I have a Polish Underfolder I purchased from you three years ago (posted in your review section-thumbs up). I have used this weapon extensively in my classes.
One of the tiny pins (of three) that hold the underfolder trunnion (I think)-the last that holds the push-button in
has become dislodged (fell out bent). All else is GTG with the weapon...I can't seem to find a replacement pin that fits any tips on something to use. Hate to mail back for such an easy repair. This rifle has 8-9 thousand rounds thru it but it's in great shape. Can't find the pins online - any help
Thanks Harry Huggins |
Answer:
I don't know who you are refering this question to.. but we are a website, we don't sell AK47s..
But you can use a roll pin to replace the one that is bent
|
Submitted
by: Harry L Huggins, 08/06/2009
|
Answered
by: ,
|
|
|
| Question &
Answer Details |
|
|
| |
| Question:
hi i am thinking of taking on the project of building my own ak from a parts kit and reciever i was wondering howshould i get the gun to hook up to the reciever (where in most guns you would find rivits) how could i do this for less and what parts would i need to buy to make the gun funtional (like what parts i need to get because the gun has full auto ones on it )and legal thanks alot
|
Answer:
You can try using screws in place of rivits. Screws are not as strong, but will work. You'd drill the old rivits out, then tap the holes and secure the reciever with screws.
You are correct, it's illegal to use the full auto trigger parts that come with the kits. Buy a US made FCG (fire control group) they are much nicer, semi-auto and legal to use. |
|
| |
|
Past
AK47 Questions & Answers
|
