| Frequently
Asked AK-47 Questions
Read
past questions and the answers
Ask
our Experts Questions about your AK-47 or other
rifles, Click
Here
It's FREE
to ask our experts a question, you don't need
to fill out any personal information
But if you do want a reply,
include your contact information, it will not
be made public. We do not answer all questions
and do not contact or personally respond to
everyone who asks for information.
Got
issues with our Answers? Do you know more than
the experts?
Then speak up, let us know we want to get accurate
information out, we're not on an ego trip.
Use our Contact
Form to add or comment on an answer, or
just use the form
here.
We're happy to post accurate info or info on
the stuff we don't know about.
Past
AK47 Questions & Answers - Click Here
| russian ak47 parts kit that needs a milled reciever |
01/02/2010 |
|
| Question:
I have a russian ak47 parts kit that needs a milled reciever. I havent had any luck finding one that i can afford. Can you point me in the right direction? Will it accept a stamped reciever insted? |
Answer:
No a stamped will not work
There is only one Milled Receiver to get IMO that is the Firing Line version
They aren't cheap, but you get what you pay for
|
Submitted
by: Jim Parrott, 01/02/2010
|
Answered
by: AK47 Dood,
|
|
|
| IS A NORINCO AK47 TRIANGLE 66 A PREBAN |
12/15/2009 |
|
Question:
IS A NORINCO AK47 TRIANGLE 66 756S7 A PREBAN
NY IS TUFF WAS SUPPOSE TO BE WHEN I PURCHASED IT |
Answer:
I would not be certain of when anything in China was made. You can research when rifles were imported though, so I suggest you researh the US Importer marks, not the Chinese factory marks
Good luck
|
Submitted
by: Richard Kretzmer, 12/15/2009
|
Answered
by: AK47 Dood,
|
|
|
| Who is the smart #ss that calls himself ak47dood!! |
Sun. Dec 13, 2009 |
|
| Question:
Who is the smart #ss that calls himself ak47dood!!!Are you on here to help people or just be a d#ck? |
Answer:
I am
I am here to have fun since it is a free service you are free to use the websites and you are free to leave.
I am rude to idiots trying to illicit illegal activities
If you want instructions on how to illegally convert an AK47 to full auto you deserve a smart-A answer..
after answering hundreds of similar questions over the last 5 years I would challenge you to disagree
|
Submitted
by: Guest, Sun. Dec 13, 2009
|
Answered
by: AK47 Dood,
|
|
|
|
| Question:
is there a way where the trigger pull could be reduced it is a little stiff |
Answer:
You could install a US trigger, try the Tapco, most people like theirs a lot
|
Submitted
by: jim bascino, 12/03/2009
|
Answered
by: AK47 Dood,
|
|
|
| AK47 magazine catch/release spring back into the trigger guard |
11/29/2009 |
|
| Question:
i have a mak-90 type ak-47 (7.62x39) i would like to know how do you reassemble the magazine catch/release spring back into the trigger guard? i have tried every thing i know how to and still can not get it ! please help thank you |
Answer:
Have you tried You Tube? sounds like a DVD would be your best bet, but you tube might have a clip of that assembily
|
Submitted
by: rick mcwhirter, 11/29/2009
|
Answered
by: ,
|
|
|
| how much does a colt ak47 cost? |
Mon. Aug 10, 2009 |
|
| Question:
how much does a colt ak47 cost? |
Answer:
zero, there is no such firearm
AK47 is Russian
Colt makes the M-16 (US rifle)
|
Submitted
by: Guest, Mon. Aug 10, 2009
|
Answered
by: ,
|
|
|
|
Question:
I have a Polish Underfolder I purchased from you three years ago (posted in your review section-thumbs up). I have used this weapon extensively in my classes.
One of the tiny pins (of three) that hold the underfolder trunnion (I think)-the last that holds the push-button in
has become dislodged (fell out bent). All else is GTG with the weapon...I can't seem to find a replacement pin that fits any tips on something to use. Hate to mail back for such an easy repair. This rifle has 8-9 thousand rounds thru it but it's in great shape. Can't find the pins online - any help
Thanks Harry Huggins |
Answer:
I don't know who you are refering this question to.. but we are a website, we don't sell AK47s..
But you can use a roll pin to replace the one that is bent
|
Submitted
by: Harry L Huggins, 08/06/2009
|
Answered
by: ,
|
|
|
| Question &
Answer Details |
|
|
| Wasr-10 AK47 Jamming issues |
03/15/2006 |
|
| Question:
Last weekend I went to the gun range to try out my two new babies, a Romanian Wasr-10 and a Romanian RPK. The RPK worked perfectly with out a hitch. However my Wasr-10 jammed roughly 3-4 times. It would try to load the round but ended up smashing the round right below the chamber. Each time it jammed I would pull the bold back and let it go in hopes of chambering the round. Sadly it didn't, so I had to remove the round. The type of ammo that I was putting through them were Monarch 7.62x39 FMJ. I put 100 rounds through both rifles. I was wondering if this happens alot with the Wasr-10 ak's?
|
Answer:
Yes it happens all the time. You have the least expencive AK47 made. You should expect to have issues..
It is an KA47 so it can be fixed though. Return it and get a better one if you still can, if not, start checking with other mags, then you'd do best to take it to a gunsmith who knows how to 'tune up' an AK47. It's an aquired art / skill and many typical gunsmiths, as good as they are, are out of their element with the sheet metal of the AK47. We'll help with what we can, let us know
Glad you like the RPK, how about some pics, and a review for other people who are looking for one?? We'll be happy to post your review. Who built it, how much was it, let everyone know |
|
| Submitted
by: , 03/15/2006 |
|
|
|
Past
AK47 Questions & Answers
|
