| Frequently
Asked AK-47 Questions
Read
past questions and the answers
Ask
our Experts Questions about your AK-47 or other
rifles, Click
Here
It's FREE
to ask our experts a question, you don't need
to fill out any personal information
But if you do want a reply,
include your contact information, it will not
be made public. We do not answer all questions
and do not contact or personally respond to
everyone who asks for information.
Got
issues with our Answers? Do you know more than
the experts?
Then speak up, let us know we want to get accurate
information out, we're not on an ego trip.
Use our Contact
Form to add or comment on an answer, or
just use the form
here.
We're happy to post accurate info or info on
the stuff we don't know about.
Past
AK47 Questions & Answers - Click Here
| russian ak47 parts kit that needs a milled reciever |
01/02/2010 |
|
| Question:
I have a russian ak47 parts kit that needs a milled reciever. I havent had any luck finding one that i can afford. Can you point me in the right direction? Will it accept a stamped reciever insted? |
Answer:
No a stamped will not work
There is only one Milled Receiver to get IMO that is the Firing Line version
They aren't cheap, but you get what you pay for
|
Submitted
by: Jim Parrott, 01/02/2010
|
Answered
by: AK47 Dood,
|
|
|
| IS A NORINCO AK47 TRIANGLE 66 A PREBAN |
12/15/2009 |
|
Question:
IS A NORINCO AK47 TRIANGLE 66 756S7 A PREBAN
NY IS TUFF WAS SUPPOSE TO BE WHEN I PURCHASED IT |
Answer:
I would not be certain of when anything in China was made. You can research when rifles were imported though, so I suggest you researh the US Importer marks, not the Chinese factory marks
Good luck
|
Submitted
by: Richard Kretzmer, 12/15/2009
|
Answered
by: AK47 Dood,
|
|
|
| Who is the smart #ss that calls himself ak47dood!! |
Sun. Dec 13, 2009 |
|
| Question:
Who is the smart #ss that calls himself ak47dood!!!Are you on here to help people or just be a d#ck? |
Answer:
I am
I am here to have fun since it is a free service you are free to use the websites and you are free to leave.
I am rude to idiots trying to illicit illegal activities
If you want instructions on how to illegally convert an AK47 to full auto you deserve a smart-A answer..
after answering hundreds of similar questions over the last 5 years I would challenge you to disagree
|
Submitted
by: Guest, Sun. Dec 13, 2009
|
Answered
by: AK47 Dood,
|
|
|
|
| Question:
is there a way where the trigger pull could be reduced it is a little stiff |
Answer:
You could install a US trigger, try the Tapco, most people like theirs a lot
|
Submitted
by: jim bascino, 12/03/2009
|
Answered
by: AK47 Dood,
|
|
|
| AK47 magazine catch/release spring back into the trigger guard |
11/29/2009 |
|
| Question:
i have a mak-90 type ak-47 (7.62x39) i would like to know how do you reassemble the magazine catch/release spring back into the trigger guard? i have tried every thing i know how to and still can not get it ! please help thank you |
Answer:
Have you tried You Tube? sounds like a DVD would be your best bet, but you tube might have a clip of that assembily
|
Submitted
by: rick mcwhirter, 11/29/2009
|
Answered
by: ,
|
|
|
| how much does a colt ak47 cost? |
Mon. Aug 10, 2009 |
|
| Question:
how much does a colt ak47 cost? |
Answer:
zero, there is no such firearm
AK47 is Russian
Colt makes the M-16 (US rifle)
|
Submitted
by: Guest, Mon. Aug 10, 2009
|
Answered
by: ,
|
|
|
|
Question:
I have a Polish Underfolder I purchased from you three years ago (posted in your review section-thumbs up). I have used this weapon extensively in my classes.
One of the tiny pins (of three) that hold the underfolder trunnion (I think)-the last that holds the push-button in
has become dislodged (fell out bent). All else is GTG with the weapon...I can't seem to find a replacement pin that fits any tips on something to use. Hate to mail back for such an easy repair. This rifle has 8-9 thousand rounds thru it but it's in great shape. Can't find the pins online - any help
Thanks Harry Huggins |
Answer:
I don't know who you are refering this question to.. but we are a website, we don't sell AK47s..
But you can use a roll pin to replace the one that is bent
|
Submitted
by: Harry L Huggins, 08/06/2009
|
Answered
by: ,
|
|
|
| Question &
Answer Details |
|
|
| Adjusting the AK47 magazine |
03/31/2006 |
|
| Question:
I have a WASR-10, and have terrible problems with it jamming when I use hollow-point ammo. The first few times I shot it, I used solid-core ammo, and it rarely jammed. However, I saw a good deal on HP rounds, and when using them, it jammed after almost every shot. The flatter tip of the HP round bumps up against the breech, and it jams in between the bolt and the breech, preventing the bolt from closing. Clearing the jam is relatively simple, but it is frustrating. I can envision one possible fix to the problem...machine a very small "ramp" at the breech end of the barrel. But I don't want to make such a modification if it could cause other problems. Do you have any better suggestions for me? Thank you in advance for your help.
|
Answer:
I think a less invacive way to fix this would be to 'tune' the magazines for the rifle /ammo combo
Use pliers to move the front edge of the wing that holds the rounds in place for the bolt. Lift them just a hair up on the front end (side toward the chamber)
this should change the angle the rounds travela nd it could be lsight enough to not interfer with other ammo types
Good Luck, Let us know if this helps |
|
| Submitted
by: , 03/31/2006 |
|
|
|
Past
AK47 Questions & Answers
|
