Questions
answered by AK47 Dood
Read past questions and the answers
Ask our Experts Questions about
shooting, Click
Here
It's FREE to ask our experts
a question,
you don't need to fill out any personal information
But if you do want a reply, include your contact
information, it will not be made public
|
| russian ak47 parts kit that needs a milled reciever |
|
|
| Question:
I have a russian ak47 parts kit that needs a milled reciever. I havent had any luck finding one that i can afford. Can you point me in the right direction? Will it accept a stamped reciever insted?
|
Answer:
No a stamped will not work
There is only one Milled Receiver to get IMO that is the Firing Line version
They aren't cheap, but you get what you pay for |
|
| |
|
|
| loose/tight magazines in WASR 10 |
|
|
Question:
Polymer mags fit tight in my WASR 10 mag well, but steel mags flop around (I dont even know how well a drum mag might fit) - I hear the steel mags are more durable over the long haul, so how do I get steel mags to fit tight in my gun? Do i need a gunsmith, special mags, or a different AK?
Also, whats a good book source for learning about all the variations of AKs, so I could make an informed opinion on my next AK or what accessories might be worthwhile?
thanks for your consideration
|
Answer:
Not much to do if the mag well is too big, and it sounds like yours is.
You could do something to tighten the mags, but if they are working OK, I wouldn't bother many WASRs have loose mags and work OK |
|
| |
|
|
| Norinco Mak-90 with slant cut stamped reciever |
|
|
| Question:
I have a Norinco Mak-90 with slant cut stamped reciever single tang and i would like to put on a Tapco T6 stock but the reciever has the slant cut can you help.
|
| Answer:
I am not sure there is an adaptor for that. Have you looked at Ace stocks? THey might have something for that rifle |
|
| |
|
|
| |
| Question:
When my firend is shooting his AK-47 it he is telling me that it does not fire all the time? He said that the firering pin is stricking the bullet but it does not go bang. It is making a mark on the bullet. What could be the problem. I think it could be bad ammo or bad mag? what do you think.
|
Answer:
you could be correct, it could also be bad springs, or a broken firing pin
Lots to look for, shouldn't be too tough to track down, good luck |
|
| |
|
|
| |
Question:
I own an AMD 65, and I would like to put normal AK wooden handguards on it. In order for me to do this, I need an AMD 65 length(shorter than standard AK) gas tube with the flanges for attaching an upper handguard. I think the Draco AK pistols use the same length gas tube, but I'm not 100% sure. Would you guys be able to find or make me a gas tube like this? If not, who could?
Thanks,
Marcus
|
| Answer:
We don't build or sell stuff like that, some of our sponsors do, you might try talking to them |
|
| |
|
|
| How many different calibers do ak-47s come in? |
|
|
| Question:
How many different calburs do ak-47s come in?
|
Answer:
usually
7.62x39
5.45 x 39
5.56 x 45
http://www.ak-47.us/Ammunition.php
|
|
| |
|
|
| what cal. is a yugo sks model 59/56 |
|
|
| Question:
what cal. is a yugo sks model 59/56 then it says 7.62*59
|
Answer:
it is 7.62x39
sounds like yours might have a sloppy stamp, or a bit of the '3' is worn away
|
|
| |
|
|
Top
of Page
Ask AK47 Dood a Question:
It's FREE
to ask our experts a question,
you don't need to fill out any personal information
except your name
If you want a reply, include
your contact information, which will not be
made public
|
|
|
