This is a new 80% receiver that goes from the stock mount to just before the chamber....
It requires that you square up & trim the front receiver section that came with your parts kit and weld the new receiver section in to place.
This receiver is milled from "Solid" stock.
The hole for mounting the stock needs threaded. All holes for "Any" FCG will need to be drilled.
The area of the receiver that the FCG goes into is a "reduced" width for building a "semi-version only" of the VZ-58.
(It can be cut out the rest of the way by any purchaser who can legally build a F/A version)
Due to the time involved with fabricating these, they will be made in “limited” quantities and will have a delivery timeframe of 8-10 business weeks from receipt of payment.